Structure of bag type dust removal machine, mainly composed of the box body, the ash discharging system and pulse reverse blowing system is composed of five parts, including the box on the cover and the outlet can be set off in the box body, including porous plate, frame filter, filter bag, air inlet under the box body is composed of an ash bucket, tripod and a blowback system including timing controller, electromagnetic diaphragm valve, injection pipe and high pressure gas storage bag. The ash discharging system comprises a dust discharging valve and a dust collecting container.

   Bag filter adopts high quality, low resistance, wear resistance, filtering accuracy of 0.5 micron filter material.

The unique design of the settlement form, the use of gravity will be the first large particles of dust removal, to avoid the impact of a long time to receive the dust bag damage, while greatly reducing the concentration of dust in the filter.

   Modular design can ensure the economic rationality of customer selection.

   The initial resistance is low, the normal operating resistance is less than 150mm.

   The use of advanced automatic compressed air pulse cleaning method, so that the longer life of the bag, to ensure that the dust collector in the lower resistance.

   During normal operation, in the system under the action of the fan, the dust gas suction inlet duct, the inlet manifold evenly into the intake chamber, and then poured into the bag, a lot of dust trapped in the bag on the surface, while the air flow through the filter bag to purify. The purified air flows into the atmosphere through the chamber along the pipeline through the fan.

   The dust remover with thickened fabric bag dust attached to the surface, dust resistance is rising, which requires regular cleaning, the resistance decreased to a line below the dust machine to run normally. The whole cleaning process mainly through the high pressure gas bag, solenoid valve, injection pipe and dust control mechanism to complete the action. The control system of automatic sequence open solenoid valve, high pressure air blowing through the blow, the dust in the adhesion rate of punching and shake down into the bucket, and then the electromagnetic valve is closed, the system of cleaning the end of operation, the filter bag filter status reply. The control system and other open solenoid valve, the implementation of cleaning of all other bags, bag after cleaning cycle, so as to achieve the purpose of dust cleaning, dust removal machine full recovery filter state, dust bucket is composed of bottom ash collecting mechanism.